HVAC Google Ads: Campaigns, Budget and Tracking That Book Jobs

HVAC Google Ads work when you split emergency repair from system replacement, target only the towns your trucks serve, and measure cost per booked job instead of cost per click. Most wasted spend comes from one blended campaign, a loose radius and no call tracking. Fix those three and the same budget buys noticeably better jobs. Running it well is a weekly routine, and the sections below give you the setup, the budget math and the numbers to hold your account against.
TL;DR
Build separate campaigns for repair and for replacement. A $150 tune-up lead and a $12,000 system lead should never share a bid strategy.
Target the ZIP codes or towns you actually serve and switch location options to presence targeting, so people outside your area don’t click.
Set your budget from your own numbers: gross profit per job, close rate and the lead cost you can afford, not a generic “$20 a day.”
Track phone calls. In HVAC most leads arrive by phone, so a click report alone hides what earns money.
Judge the account by cost per booked job and revenue, then review search terms every week.
Table of Contents
Why Google Ads suits HVAC, and why it burns money
People search for HVAC help at the moment the system fails or the quote is due. “AC not cooling” in July is a buying decision, not a research session. That intent is why paid search is a core channel for heating and cooling companies.
The same intent makes the auction expensive. Competing HVAC companies bid on the same phrases, and every wasted click on a job-seeker, a DIY viewer or a homeowner two counties away comes straight out of your margin. The difference between a profitable account and a money pit is rarely the budget. It is structure, targeting and measurement.
If you want the wider picture of where HVAC work comes from beyond paid search, our guide to HVAC contractor leads covers the channels side by side.
Google Ads versus Local Services Ads
Two products matter for an HVAC company.
Search ads (standard Google Ads) show above and below the organic results when someone types a query. You choose the keywords, write the ad, set the bids and send clicks to a landing page. You have full control and full responsibility.
Local Services Ads show at the very top with a badge and are priced per lead rather than per click. They suit emergency and repair calls where a homeowner wants to phone someone fast. They give you less control over the message, and they work best next to search ads rather than instead of them.
For most HVAC companies the practical answer is to run search campaigns you control, built around the job types below, and treat local-lead ads as an additional source of calls to be measured with the same booked-job yardstick.
The two campaigns every HVAC account needs
The most useful structural idea comes from ACHR News’s 2026 guide to HVACR Google Ads: segment by job type. As the author puts it, there is a world of difference between a $150 furnace tune-up lead and a $12,000 full-system replacement lead, so they get different campaigns.
Emergency repair
This campaign captures people with a failure right now. Typical keyword themes are “AC repair near me,” “AC not cooling,” “furnace not working” and “no heat emergency.” The guide recommends Maximize Conversions bidding here, because speed of the call is what matters, and copy built around response time, such as a stated arrival window.
Keep the ad promise something you can deliver. A headline about a 90-minute response is only worth running if dispatch can honor it in July.
System replacement
This campaign targets planned, high-value purchases: “AC replacement,” “new furnace installation,” “heat pump installation,” “furnace replacement financing.” The ACHR guide pairs it with Target CPA bidding and value-led copy, for example a financing offer. Searchers here compare, so keep “cost” and “price” in the keyword mix instead of excluding them. A person typing “new HVAC cost” is shopping.
Maintenance plans
Tune-ups and maintenance plans (“AC tune up,” “HVAC maintenance plan”) are lower-value on a single visit but build recurring revenue. Give them their own small campaign or ad group so their lower lead value doesn’t distort the replacement numbers.
Keywords, negatives and match types
Start with the problems and services customers actually type, then validate volumes in Keyword Planner for your own area. Begin with exact and phrase match, which keep you close to the searches you chose. Move to broad match only after your account has enough conversion data that reflects booked jobs, not just form fills, because broad match learns from whatever you tell it counts.
Negative keywords matter as much as the keywords. The ACHR guide advises using them aggressively to avoid paying for DIY repair tips, parts you don’t sell, job and employment searches and competitor login pages. A starter list:
Jobs: jobs, careers, salary, hiring, apprentice, training, school
DIY: how to, manual, wiring diagram, youtube, do it yourself
Parts and resale: parts, wholesale, used, surplus
Wrong equipment: car, auto, RV, refrigerator
Out of scope: services you don’t offer and towns you don’t serve
Open the search terms report weekly. Every irrelevant query you find becomes a negative, and the list compounds. One exception: don’t add “cost” or “price” as negatives in the replacement campaign.
Target the area your trucks actually serve
A single big radius around the shop pulls in clicks from places you won’t drive to. Instead, list the ZIP codes or towns you serve and exclude pockets you skip.
There is also a setting that catches many new advertisers. By default, Google includes people who are in or regularly in your target area and also people who have shown interest in it through searches or recent visits, as Google’s advanced location options page explains. The same page notes that most campaigns see fewer impressions when moving away from the default, so use the change to refine traffic, which is the point for a service business. Google’s guidance on preventing clicks outside your targeted locations says to choose presence targeting: people in or regularly in your targeted locations.
Fewer impressions with higher relevance is the right trade when every click costs several dollars and your technicians can’t drive to the next state.
Ads and landing pages that convert local searchers
Write each ad so it matches the search. If someone searches “furnace repair,” the headline says furnace repair, the description names your service area and the next step is a call. Put “HVAC” or the specific service, such as AC repair or furnace installation, in at least one headline, and use call and location assets so the ad shows your number and your area.
The click is only half the job. The ACHR guide lists what a 2026 HVAC landing page should have:
A sticky “Call Now” button on mobile
Real photos or video of your trucks and team, not stock images
Live chat or text, including the option to text a photo of the unit
Online scheduling
Trust badges such as BBB, NATE certification and Google Guaranteed, visible without scrolling
The same guide notes that a Quality Score of 8 to 10, which comes from an ad, keyword and landing page that agree with each other, lowers your cost per click. In practice, one landing page per campaign theme beats sending every ad to the homepage. A replacement-financing ad should land on a replacement page with the financing offer visible, not on a page that lists every service you do.
We go deeper on ad construction in how to create effective online ads for construction services.
How much to budget
The question “is $20 a day enough?” has no universal answer. In a small market with little competition, it can generate a handful of calls. In a competitive metro with emergency repair keywords at several dollars a click, it may buy only a few clicks before the budget runs out. What decides it is your own economics.
Work backward from the lead cost you can afford:
Gross profit per job. Suppose an average repair or install earns $600 in gross profit.
Close rate. If you book 35% of leads, each lead is worth $210 in expected profit ($600 x 0.35).
Safety margin. You want profit left over, so you would not pay the full $210. Paying roughly 40% to 60% of it puts an acceptable lead cost near $85 to $125.
Daily budget. Multiply the leads you want per month by that lead cost and divide by 30. Twenty leads at $100 each is $2,000 a month, about $67 a day.
This is an illustration with example numbers. Replace them with your own gross profit and close rate from your books.
Two rules keep the test honest. Give the campaign enough volume to judge: enough clicks to see whether targeting is right, enough conversions to see a lead-cost trend, and enough booked jobs to judge return. Don’t change bids and keywords every other day during that window, or you never learn what worked. And remember that ad spend is separate from the cost of managing the account, whether you do that yourself or have it done for you.
What leads cost: benchmarks to hold your account against
Use benchmarks as a sanity check, never as a target. Costs move with season, market and competition.
One recent dataset is The Data Driven Trades’ benchmark of Google Local Services Ads, covering 760 home-services businesses from March 1 to 25, 2026. It found HVAC leads cost $56.39 each, and $288.29 per paying HVAC customer, against an average HVAC ticket of $2,433.87, the highest of any trade in the sample.
That last pair of numbers is the lesson. A lead costing $56 is not the real price of a customer. The price of a customer was about five times higher, and still comfortably below the ticket. Judge every channel at the booked-job level, which brings us to tracking.
Track calls and booked jobs, not just clicks

In HVAC, the phone is the conversion. The ACHR guide says about 90% of HVACR leads happen over the phone, so without call tracking you can’t tell whether “furnace repair” or “AC installation” is the keyword paying the bills. Set up call tracking with Google’s call assets and forwarding numbers, and record outcomes for each call.
Then go one step further than leads. Cost per lead measures the price of a contact, and contacts differ in quality. Here is a worked example. Channel A produces 80 leads at $45 each and books 28% of them. Channel B produces 25 leads at $120 each and books 70%.
Channel A | Channel B | |
Leads | 80 | 25 |
Cost per lead | $45 | $120 |
Total spend | $3,600 | $3,000 |
Booking rate | 28% | 70% |
Booked jobs | about 22 | about 17.5 |
Cost per booked job | about $161 | about $171 |
Channel A looks far cheaper per lead, yet the gap per booked job is small, and with a slightly lower booking rate it flips. Only booked-job numbers show you that. Each month, look at:
Cost per booked job by campaign
Booking rate
Revenue attributed to each campaign
Call volume by source and answer rate
The 90-day trend in cost per booked job
Answer rate is the quiet killer. Paying $9 or more for a click and then missing the call because the office is on another line is the cheapest improvement in most accounts: pick up, or route to a call-answering process.
Seven mistakes that waste HVAC ad budgets
One campaign for everything. Repair, replacement and maintenance blended together make bidding impossible to tune.
No negative keywords. You pay for job seekers, DIY viewers and parts shoppers.
A giant radius. Clicks from towns you don’t serve are pure waste.
Default location setting. The interest-based default can show ads to people who are only curious about your area.
Sending traffic to the homepage. The searcher wanted one thing and has to hunt for it.
No call tracking. You see clicks but not which ones became revenue.
Judging by cost per lead. Contacts are not jobs.
Our wider guide on PPC for contractors walks through the same discipline for other trades, and contractor lead generation shows how paid search fits with local SEO and reviews.
A weekly routine that keeps the account healthy
Google Ads is not set-and-forget. A realistic routine for one owner or office manager:
Weekly: read the search terms report, add negatives, check that calls are being answered and logged with an outcome.
Every two weeks: compare ad variations and pause the weakest headline; check that landing pages load fast on a phone.
Monthly: review cost per booked job by campaign, shift budget toward what books, and adjust for the season. Cooling demand and heating demand peak at different times, so budgets should follow them.
That is several hours a month before you touch a truck. This is where many owners decide whether to keep doing it themselves.
Where A1 Contractor Marketing fits
The account structure, search term review, landing pages and reporting above are exactly the work we do for trade contractors. We run PPC campaigns, build and optimize landing pages and funnels, connect lead handling to a CRM for automation, manage reviews and reputation, and report performance in real time, then use that feedback to optimize campaigns. Local SEO sits alongside the ads, so the same searcher who skips your ad can still find you in the map and organic results.
Our published plans are GROWTH at $2,450 per month and ESSENTIAL at $3,500 per month, plus a FULL SERVICE (completely outsourced) option for contractors who want marketing off their plate entirely. Full service has no published price. You can see what each plan covers on the pricing page, or look at our lead generation for contractors page to see how the funnel fits together.

If you want the weekly routine handled while you run jobs, book a consultation call from the pricing page and we will talk through your market and service area.
Our perspective
Most HVAC owners we talk to have the same problem: revenue that swings with the weather and the phone. Ads can smooth that out, but only when the whole path works together: the ad, the landing page, the call handling and the reporting. That is why we don’t treat PPC as a standalone product. Our solution combines SEO, PPC, automation, CRM and real-time reporting for trade contractors, and the reporting feeds back into the campaigns. When you can see which campaigns produce booked work, you stop guessing and start moving budget where it pays. The other piece is your time. A contractor’s best hours go to quoting and running crews. We built the service so that marketing takes minimal time from you, with consistent, qualified leads as the goal rather than a pile of clicks. A1 Contractor Marketing
FAQ
Is $20 a day good for HVAC Google Ads?
It depends on your market. In a small town with little competition it can produce a few calls a week, but in a competitive metro with expensive repair keywords it may exhaust the budget after a handful of clicks. Set the budget from your gross profit per job, close rate and affordable lead cost, as in the worked example above.
How do I advertise my HVAC company on Google?
Create separate search campaigns for emergency repair and for system replacement, target the ZIP codes or towns you serve, and write ads that match each search. Send each campaign to its own landing page with a clear call button, and add call tracking so you can see which keywords produce booked jobs.
What is a good cost per lead for HVAC?
It varies by season, market and ad type. One March 2026 benchmark of Local Services Ads put HVAC leads at $56.39 each and $288.29 per paying customer. Compare your own cost per booked job with your average ticket, because that ratio decides whether the channel is profitable.
Should I use Local Services Ads or regular Google Ads?
Many HVAC companies use both. Local Services Ads put you at the top with per-lead pricing, which suits urgent calls. Search ads give you control over keywords, messaging and landing pages, so they carry replacement and maintenance campaigns best. Measure both by booked jobs.
Sources
Recommended

Comments